So how do I do that? Is there a class in the OpenMap that can get me that
information?
Tony Vasile
Senior Software Engineer
CSC
Level 3B, 26 Talavera Road Macquarie Park NSW 2113 Australia
GBS | p: +61 2 9034 2404 | f: +61 2 9034 2398 | avasile_at_csc.com |
www.csc.com
Please consider the environment before printing this e-mail.
CSC - This is a private message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the
mistake in delivery. Note: Regardless of content, this e-mail shall not
operate to bind CSC to any order or other contract unless pursuant to
explicit written agreement or government initiative expressly permitting
the use of e-mail for such purpose • CSC Australia Pty Limited; Registered
Office: 26 Talavera Road, Macquarie Park NSW 2113 Australia; Incorporated
in Australia ACN: 008 476 944
From: Don Dietrick <dfdietrick_at_gmail.com>
To: Tony Vasile <avasile_at_csc.com.au>
Cc: openmap-users_at_bbn.com
Date: 28/02/2012 04:25 PM
Subject: Re: [OpenMap Users] Openmap displays the VMAP coastline
approximately 1.3 minutes of arc to the south of the correct position.
Can you check the datum of your WVS data? I don't have WVS.
- Don
On Feb 24, 2012, at 3:59 PM, Tony Vasile wrote:
> Hi Don,
> No what we are seeing is a constant shift of the VMAP data in
relation to the DTED data. That is the example point given below is
happening across the map. Unfortunately we are using the DTED data for
elevation information and if the DTED layer isn't currently displayed if
one tries to navigate using the VMAP data one can run aground even though
it appears you are in Sydney Harbour because of the discrepancy. Not only
do we have a south shift there is also a west shift when both layers are
displayed. Our data source for the VMAP data is I believe World Vector
Shoreline data. I'm not 100% sure of this. I would have to wait till
Monday to find out.
>
>
>
> Tony Vasile
> Senior Software Engineer
> CSC
>
> Level 3B, 26 Talavera Road Macquarie Park NSW 2113 Australia
> GBS | p: +61 2 9034 2404 | f: +61 2 9034 2398 | avasile_at_csc.com |
www.csc.com
>
> -----Don Dietrick <dfdietrick_at_gmail.com> wrote: -----
> To: Tony Vasile <avasile_at_csc.com.au>
> From: Don Dietrick <dfdietrick_at_gmail.com>
> Date: 02/25/2012 02:41AM
> Cc: openmap-users_at_bbn.com
> Subject: Re: [OpenMap Users] Openmap displays the VMAP coastline
approximately 1.3 minutes of arc to the south of the correct position.
>
> Hi Tony,
>
> The DTED layer in OpenMap doesn't show shoreline - the clear areas on
> the layer are where the elevation is zero. DTED data doesn't know
> anything about shorelines. The edge of the DTED display shouldn't
> exactly match up with the edge of VMAP shoreline features, but I would
> generally expect the DTED to be inside the shoreline features. Is
> that what you are seeing?
>
> Depending on the level of VMAP data (Level 0 is based on 1:1,000,000
> charts) and the level of DTED data (DTED level 0 has posts every 1km,
> DTED level 1 has posts every 100m, or something like that), you won't
> get them to line up perfectly - it's just a matter of the resolution
> of the data and the fact that they aren't trying to show the same
> thing.
>
> For your map display, I would go with your VMAP data and use the DTED
> to augment it by rendering the VMAP land areas with some transparency
> so the elevation shading shows up behind it.
>
> Hope this helps,
>
> Don
>
> On Thu, Feb 23, 2012 at 11:07 PM, Tony Vasile <avasile_at_csc.com.au>
wrote:
> > Openmap displays the tip of South Head of Sydney Harbour on the VMAP
> > coastline at 33:51.734S 151:16.672E.
> > On the same Openmap display, the position of the DTED data
corresponding to
> > the same point is 33:49.944S 151:16.876E (recognizing that the DTED
data is
> > more detailed and so the corresponding points are approximate). This
> > equates to a difference of approximately 1.8 minutes South. An
independent
> > check puts the equivalent DTED position at 33:50.102S 151:16.960E
which
> > confirms that the DTED position is correct. The VMAP display was then
> > checked using VPFview2.1 which located the same point at 33:50.412S
> > 151:16.665E. This corresponds better with the DTED data and confirms
that
> > the source VMAP data is correct.
> > This shows that Openmap is displaying the VMAP data with a
displacement of
> > 1.3 minutes South from the DTED data, which is a mix DTED Level 1 and
Level
> > 0.
> >
> > We are using OpenMap 4.6.5.
> >
> > Any suggestions on how to get the images to align better?
> >
> > Tony Vasile
> > Senior Software Engineer
> > CSC
> >
> > Level 3B, 26 Talavera Road Macquarie Park NSW 2113 Australia
> > GBS | p: +61 2 9034 2404 | f: +61 2 9034 2398 | avasile_at_csc.com |
> > www.csc.com
> >
> >
> > Please consider the environment before printing this e-mail.
> >
> > CSC - This is a private message. If you are not the intended
recipient,
> > please delete without copying and kindly advise us by e-mail of the
mistake
> > in delivery. Note: Regardless of content, this e-mail shall not
operate to
> > bind CSC to any order or other contract unless pursuant to explicit
written
> > agreement or government initiative expressly permitting the use of
e-mail
> > for such purpose • CSC Australia Pty Limited; Registered Office: 26
Talavera
> > Road, Macquarie Park NSW 2113 Australia; Incorporated in Australia
ACN: 008
> > 476 944
>
>
> Please consider the environment before printing this e-mail.
>
> CSC - This is a private message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the
mistake in delivery. Note: Regardless of content, this e-mail shall not
operate to bind CSC to any order or other contract unless pursuant to
explicit written agreement or government initiative expressly permitting
the use of e-mail for such purpose • CSC Australia Pty Limited; Registered
Office: 26 Talavera Road, Macquarie Park NSW 2113 Australia; Incorporated
in Australia ACN: 008 476 944
--
[To unsubscribe to this list send an email to "majdart_at_bbn.com"
with the following text in the BODY of the message "unsubscribe openmap-users"]
Received on Tue Feb 28 2012 - 00:33:19 EST